Porter-Cable JOB BOSS C3555 - Manual (Page 15)

15- ENG D28301
How to Start:
1. Turn the On/Auto/Off lever to “AUTO” and allow tank pressure to build.
Motor will stop when tank pressure reaches “cut-out” pressure.
2. Pull the regulator knob out and turn clockwise to increase pressure. When
the desired pressure is reached push knob in to lock in place. The
compressor is ready for use.
Risk to Breathing. Always operate the air compressor in
well-ventilated areas free of gasoline or other combustible
vapors. If the compressor is being used to operate a sprayer DO NOT
place near the spray area.
How to Use Remote Console:
When needed the remote console allows remote air regulation and control
closer to the work area.
Risk of Flying Objects. Reduce air pressure in tank to 60 psi
maximum before removing or connecting portable control
panel and when connecting hose to tank quick-connect coupler.
1.
Turn knobs counter clockwise to loosen knobs securing control panel.
2. Slide console up and away from frame, disconnect air hose from quick connect
(a), and remove console.
3. Connect air hose (sold separately) to quick connect plug (b) and quick connect
(a). The console can then be brought closer to the work site to rest on the
console brackets (d) or be temporarily mounted using the mounting hole (c).
Risk of Unsafe Operation. Can cause serious injury or death.
Tank may contain 175 PSI of air pressure. Never connect
accessories to unregulated air. Never operate tools or accessories above
marked maximum pressure.
a
a
b
d
c