Various operations, Display, Digit buttons – Pioneer PD-F1009 User Manual
Page 12: Disc, Checking the numbers of the stored discs, Clear program repeat display, Track disc, Follow steps 1 and 2 then press 3
12
5
1
¡
4
¢
RANDOM
DISC
DISC
0
TRACK
7
8
9
4
5
6
1
2
3
DISPLAY
MODE
CLEAR
PROGRAM
REPEAT
7
8
3
–
+
0
7
8
9
4
5
6
1
2
3
To program and play only the discs
you want to hear (CUSTOM play)
This unit lets you program up to 300 of your favorite discs. For
example, you can store all the discs of your favorite artist, or some
other group of personal selections, and play only those discs.
You can even add other discs to the custom later on.
Also, there are 5 programmable custom files in which you can
program any discs you like.
Operation example : Programming discs 3 and 12 in custom file 5
In the stop mode, press
the MODE button several
times to set the custom
mode.
Select the custom num-
ber with the digit buttons.
DISC
TRACK
MIN
SEC
CUSTOM
• If some disc number appears, press CLEAR.
Select the disc number
with the remote control
unit’s digit buttons.
DISC
TRACK
MIN
SEC
CUSTOM
• The disc number can also be selected with DISC (–/+) or the
main unit’s jog dial. In this case, because custom registration
will function after approx. 2 seconds, step 4 is not necessary.
Press DISC.
Repeat steps
3
and
4
to
store other discs.
DISC
TRACK
MIN
SEC
CUSTOM
CLEAR
MODE
DISC
Digit buttons
MODE
DISC (–/+)
CLEAR
9
8
7
0
6
5
4
3
2
1
DISPLAY
DISPLAY
(
MODE
)
MODE
DISC
PUSH ENTER
RANDOM
STANDBY
ACCESS
PLAY
OPEN/
CLOSE
UNLOAD
STANDBY/ON
SINGLE LOADER
FILE–TYPE CD MECHANISM
Î
CLEAR
PROGRAM
REPEAT
DISPLAY
6
7
9
8
7
0
6
5
4
3
2
1
TRACK
DISC
9
8
7
0
6
5
4
3
2
1
Digit buttons
MODE
Light
3
(
5
)
VARIOUS OPERATIONS
1
2
3
4
5
(
DISC
)
(
3
)
DISC
1
2
To start playback
Follow steps
1
and
2
then
press
3.
Playback starts from the lowest
disc No.
Checking the numbers of the stored discs.
After steps and , press DISPLAY 3 times.You
should see a display like that shown below.
Press DISC(–/+). Each time you press DISC(–/+), a disc
number stored in the CUSTOM file is displayed. When
all the disc numbers have been displayed, the disc
number changes to a blank. (To perform this operation
on the main unit, turn the jog dial clockwise.)
DISC
TRACK
MIN
SEC
CUSTOM
Pressing the front panel’s CLEAR button
during the custom mode will cancel the
displayed disc number from the custom
file.
• When the jog dial is used during custom playback, only the
discs stored in the custom file can be selected.
• If you use the digit buttons and DISC during CUSTOM playback
to choose a disc not stored in the CUSTOM file, “NO DISC” will
be displayed for approximately 3 seconds.
• When a disc appointed to the CUSTOM file is not loaded in the
rack, “NO DISC” is displayed for approximately 3 seconds, the
disc is erased from memory, and CUSTOM searches for the
next disc.
• The discs stored in the CUSTOM file will not be erased when
you turn off the power.
1
2
3
3
2
4
4
1