Panasonic KX-TG6432 - Manual (Page 40)

Intercom/Locator
40 For assistance, please visit http://www.panasonic.com/help
Transferring calls,
conference calls
Outside calls can be transferred or a
conference call with an outside party can
be made:
– between 2 handsets
– between the handset and base unit
(KX-TG6441 series: page 3)
Example: When handset 1 transfers a
call to handset 2 and/or establishes a
conference call.
1 Handset 1:
During an outside call, press
{
HOLD} to put the call on hold.
2 Handset 1:
{V}
/{^}: Select the desired unit. i
{ CALL}
L If the paged party does not
answer, press {C} to return to
the outside call.
3 Handset 2 (Receiver):
Press {C} to answer the page.
L Handset 2 can talk with handset
1.
4 Proceed with the desired operation.
■ To transfer the call:
1 Handset 1:
Press {OFF}.
2 Handset 2 (Receiver):
Press {C}.
L Handset 2 can talk with the
outside caller.
■ To establish a conference call:
Handset 1:
Press {CONF}.
L To leave the conference, press
{
OFF}. The other parties can
continue the conversation.
L To put the outside call on hold,
press {HOLD}. To resume the
conference, press {CONF}.
Note:
L If you transfer a call from a handset to
the base unit, the base unit user
should press {SP-PHONE} instead of
{C}
, handset 2 (Receiver) operation
in step 3 and 4 (KX-TG6441 series:
page 3).
Example: When the base unit transfers
a call to a handset and/or establishes a
conference call.
1 Base unit:
During an outside call, press
{
INTERCOM} to put the call on
hold.
When 2 or more handsets are
registered:
– To page a specific handset, enter
the handset number.
– To page all handsets, press {0} or
wait for a few seconds.
L If paged party does not answer,
press {INTERCOM} to return to
the outside call.
2 Handset:
Press {C}.
L Handset can talk with the base
unit.
3 Proceed with the desired operation.
■ To transfer the call:
1 Base unit:
Press {SP-PHONE}.
2 Handset:
Press {C}.
L Handset can talk with outside
caller.
Handset
Base unit
Available for:
KX-TG6441 series (page 3)
TG643x(e).book Page 40 Monday, December 1, 2008 10:13 AM