Pioneer DV-280-S - Manual (Page 13)

Connecting up 02
13
En
Connecting to an AV receiver
To enjoy multichannel surround sound you
need to connect this player to an AV receiver
using the digital audio output.
In addition to a digital connection, we
recommend also connecting using the stereo
analog connection.
You’ll probably also want to connect a video
output to your AV receiver. You can use any of
the video outputs available on this player (the
illustration shows a standard (composite)
connection).
1 Connect the DIGITAL AUDIO OUT
COAXIAL jack on this player to a coaxial
digital input on your AV receiver.
Use a coaxial cable (similar to the supplied
video cable) to connect the
COAXIAL DIGITAL
AUDIO OUT jack to a coaxial input on your AV
receiver.
2 Connect the analog AUDIO OUT L/R and
VIDEO OUT jacks on this player to a set of
analog audio and video inputs on your AV
receiver.
• You can use the S-video or component
video jacks to connect to the AV receiver if
you prefer.
S-VIDEO
OUT
AUDIO OUT
COAXIAL
COMPONENT VIDEO OUT DIGITAL AUDIO OUT
VIDEO OUT
P R
P B
Y
L
R
AV receiver
DIGITAL IN
(COAXIAL)
S-VIDEO
OUT
AUDIO OUT
COAXIAL
COMPONENT VIDEO OUT DIGITAL AUDIO OUT
VIDEO OUT
P R
P B
Y
L
R
AV receiver AUDIO/
VIDEO IN
DV285 KU.book Page 13 Thursday, February 24, 2005 1:09 PM