Philips CD SOUNDMACHINE AZ1839 - Manual (Page 9)

The system will not play or support
the following:
• Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
will not be shown in the display.
• Non-supported file formats are skipped.
This means that e.g.: Word documents .doc
or MP3 files with extension. dlf are ignored
and will not be played.
• AAC, WAV, PCM. NTFS audio files
• DRM protected WMA files
• WMA files in Lossless format
Playing a USB mass storage device
1 Make sure that your AZ1839 is being pow-
ered by AC mains or specified batteries.
2 Adjust the source selector to CD/USB.
3 Press CD/USB once or more to enter the
USB mode.
➜ Display shows - - - .
4 Plug a compatible USB mass storage device
to AZ1839’s USB port marked
. If
needed, use a suitable USB cable to connect
between the device and AZ1839’s USB
port.
➜ The device will automatically power on.
• If the device is not powered on, turn on the
power manually, then re-connnect it.
➜ AZ1839’s display shows - - - and then the
total number of playable audio files (Max.
displayed track number is 511) stored on
the device.
5 Press
2; on your AZ1839 to start play.
➜
AZ1839’s display will show the current
track number
.
Helpful hints:
– Up to 511 playable audio files stored on a
USB mass storage device can be played on
AZ1839.
– Up to 99 playable albums stored on a USB
mass storage device can be selected and
displayed on AZ1839.
– Make sure that file names of MP3 files end
with .mp3. and the file names of WMA files
end with .wma.
– For DRM protected WMA files, use Windows
Media Player 10 (or later) for conversion. Visit
www.microsoft.com for details about Windows
Media Player and WM DRM (Windows Media
Digital Rights Management).
– For USB device playing, if the display shows
"OL", it means that the USB device is electrically
overloading AZ1839.You need to change a
USB device.
USB Connection
ifu_az1839_55_eng 2008.4.17 2:04 PM Page 9