Polycom VTX 1000 - Manual

Soundstation VTX 1000® Software Version 1.60.022 Release Notes
Date: June 23, 2006
Specific Release: SoundStation VTX 1000 software version 1.60.022
Subject: Release notes describing changes from Version 1.60.013 to 1.60.022.
Software Improvements/Bug Fixes
Audio
1. The SoundStation VTX 1000 automatically sent a wideband signature tone, even if
phone was set to narrowband mode only. This has been fixed.
2. Line transmission audio will be muted when in HSSB bridged mode and in Hold state.
This fix affects VTX -VSX bridge calls only.
UI
1. Changes to ensure VTX mute indications will match VSX, particularly when going from
idle/on-hook (and muted) to off-hook/redial, or when receiving incoming VTX call while
system is muted.
2. Corrected typographical errors in the Admin Setup title setup with passcode set and in
menu numbering.
3. Allow ability to press “#” and “*” fast or simultaneously without causing issues
4. Ensure passcode key icon is present on all relevant screens.
5. Ensure diagnostic test speaker output continues if phone goes off-hook during test.