Palsonic 5120S - Manual (Page 12)

I D/K M/N B/G
If picture and sound’s effect of the channel is instead poor by making use
of FINE, you can correct them by making use of
AFT. Enter into the PRESET menu, press POS+/-
button to select AFT, press VOL+/- button to
select AFT ON.
Note: If the program is in AFT ON, the position
number displayed on the screen will be in green.
1. Press the RECALL button, the colour and sound system
will be displayed on the screen.
9
AUTO
B/G
2. If the colour is abnormal, press the C-SYS button to
select proper colour system. Every time you press the
C-SYS button, the colour system will change in the
sequence below.
AUTO PAL N3.58 N4.43
9
PAL
B/G
3.
If the sound is abnormal, press the S-SYS button to
select proper sound system. Every time you press the
S-SYS button, the sound system will change in the
sequence below.
Now you can watch the broadcasting TV program on the preset channels.
9
PAL
B/G
Note: You can also make use of SYSTEM menu to set the colour and sound system. (Refer to
SYSTEM SETTING on page 14.)
AFT (Automatic Frequency Tuning)
OPERATION
Tuning in (continued)
10
The setting of colour and sound system
PRESET
22
SKIP OFF
BAND UHF
FINE
AFT OFF
SEARCH
ASM
S-RCV OFF
POS