Playing a usb mass storage device – Philips MCD716/12 User Manual
Page 4

Playing a disc
Programming and tuning to radio stations
1
2
3
Press
SOURCE
(
TUNER
on the remote) to select tuner source.
Press
PROGRAM
on the remote for more than two seconds to program all available
stations in order of waveband.
Press
PRESET+/-
(
¡ / ™
on the remote) until the desired preset station is displayed.
MCD716_12_QSG_V2.0
Tip
Detailed playback features and
additional functions are described in the
accompany owner's manual.
Notes for remote control:
–
First, select the source you wish to control by
pressing one of the source select keys on the remote
control (DISC or TUNER, for example).
–
Then select the desired function ( 2;,
н, л for
example).
1
2
3
Press
OPEN •CLOSE
з
(
з
on the remote control) to open the disc tray and load in a
disc, then press the same button again to close the disc tray.
➜ Make sure the label side of the disc is facing up.
Playback will start automatically. If not press
ÉÅ
.
To stop playback, press
PRESET-/
9
(
9
on the remote).
OPEN•CLOSE
1
2
3
Insert the USB device’s USB plug into the socket
on the set.
Press
SOURCE
once or more (or
USB
on the remote control) to select
USB
.
Play the USB’s audio files as you do with the albums/tracks on a CD,
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players
(USB 2.0 or USB1.1)
,
memory cards (requires an additional card reader to
work with this Hi-Fi system).
MCD716 QUG_12_Eng
2010.6.23, 18:07
4