Specifications, Additional information – Pioneer DEH-2000MP User Manual
Page 20
Specifications
General
Power source ............................. 14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system ................... Negative type
Max. current consumption
..................................................... 10.0 A
Dimensions (W × H × D):
DIN
Chassis ..................... 178 Ч 50 Ч 162 mm
(7 Ч 2 Ч 6-3/8 in.)
Nose ........................... 188 Ч 58 Ч 15 mm
(7-3/8 Ч 2-1/4 Ч 5/8 in.)
D
Chassis ..................... 178 Ч 50 Ч 162 mm
(7 Ч 2 Ч 6-3/8 in.)
Nose ........................... 170 Ч 48 Ч 15 mm
(6-3/4 Ч 1-7/8 Ч 5/8 in.)
Weight .......................................... 1.3 kg (2.9 lbs)
Audio
Continuous power output is 22 W per channel minimum
into 4 ohms, both channels driven 50 Hz to 15 000 Hz
with no more than 5% THD.
Maximum power output ....... 50 W × 4
Load impedance ...................... 4
W (4 W to 8 W allowable)
Preout max output level ....... 2.2 V
Tone controls:
Bass
Frequency ................ 100 Hz
Gain ............................ ±13dB
Mid
Frequency ................ 1 kHz
Gain ............................ ±12 dB
Treble
Frequency ................ 10 kHz
Gain ............................ ±12 dB
CD player
System .......................................... Compact disc audio system
Usable discs .............................. Compact disc
Signal-to-noise ratio ............... 94 dB (1 kHz) (IHF-A net-
work)
Number of channels .............. 2 (stereo)
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11 (2ch
audio)
(Windows Media Player)
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
WAV signal format .................. Linear PCM & MS ADPCM
FM tuner
Frequency range ...................... 87.9 MHz to 107.9 MHz
Usable sensitivity ..................... 8 dBf (0.7 µV/75
W, mono,
S/N: 30 dB)
Signal-to-noise ratio ............... 75 dB (IHF-A network)
AM tuner
Frequency range ...................... 530 kHz to 1 710 kHz (10
kHz)
Usable sensitivity ..................... 18 µV (S/N: 20 dB)
Signal-to-noise ratio ............... 65 dB (IHF-A network)
CEA2006 Specifications
Power output ............................. 14 W RMS × 4 Channels (4
W and ≦ 1 % THD+N)
S/N ratio ....................................... 91 dBA (reference: 1 W into
4
W)
Note
Specifications and the design are subject to mod-
ifications without notice due to improvements.
Additional Information
En
20
Appendix