Philips ISIS iQ UNO User Manual

Page 6

Assembling the Pump Body of the ISIS iQ UNO

Need Help? Call us at 1.800.54.AVENT or visit www.aventamerica.com

Click the white valve into the pump
body, so that it fits securely into the
small round hole. Make sure the pointed
side of the valve is facing down.

Fit the clear silicone diaphragm into the
pump body. Ensure a perfect seal around
the rim by pressing down with your fingers.
(This is easier if assembled while the
diaphragm is wet.)

Parts you will need for steps 1-4:

White valve

Silicone diaphragm

Fit the Let-down Massage Cushion™ onto the
pump funnel. Secure the rim of the Let-down
Massage Cushion around the funnel, so that
there are no gaps. (This is easier if assembled
while the Let-down Massage Cushion is wet.)

Some women may prefer to use the pump
without the Let-down Massage Cushion.
Let-down Massage Cushion has petals that
flex in and out to gently massage the area
around the breast. This is intended to help
stimulate a fast, natural milk flow. When using
the breast pump without Let-down Massage
Cushion, the maximum vacuum level
achievable will be higher.

To ensure that the pump is
completely stable, insert the
pump base into the stand.

Let-down Massage Cushion

™

White stand

Screw the pump body onto the
reusable base until securely in place.

Pump body

Reusable base

Assembling the Pump Body of the ISIS iQ UNO

Before assembling, make sure that you have correctly washed and sanitized
the pump. See section titled ‘Cleaning and Sanitizing ISIS iQ’ on page 6.