Philips HTS3548 - Manual (Page 17)

17
English
1
2
Basic Connections
(continued)
FM
antenna
AM/MW
antenna
fi x the claw
into the slot
Step 4: Connecting the
FM and AM/MW
antennas
A Connect the supplied AM/MW loop
antenna to the AM/MW socket. Place
the AM/MW loop antenna on a shelf, or
attach it to a stand or wall.
B Connect the supplied FM antenna to the
FM 75 Ω socket. Extend the FM antenna
and fi x its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
Step 5: Connecting the
power cord
Notes:
– For power supply rating, refer to the
rear or bottom of the main unit.
– Turning off to standby mode does not
disconnect the unit from mains.
A When completing all the connections, set
the voltage selector to the local power
line voltage.
B Connect the AC power cord to the
power outlet.
The standby LED on the main unit
lights up.
Helpful Hint:
– Before making or changing any
connections, make sure that all the devices
are disconnected from the power outlet.
1_hts3548_93_eng2_final.indd 17 1_hts3548_93_eng2_final.indd 17 2008-05-02 9:36:37 AM 2008-05-02 9:36:37 AM