PYLE Audio PYLE Hydra Series PLCD22MRP - Manual (Page 12)

of the LCD display backlight.
RESET FUNCTION
When you pull out the plastic panel covering
the CD opening, you will see the reset
button (26) is placed above the disc slot
(5). It must be activated with either a
ballpoint pen or thin metal object. The
reset button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
RECOVERING INITIAL VALUE
In radio (AM/FM/WB) mode, press MODE
button (6) for more than three seconds,
the display will appear “EEP INIT”, and all
settings recover factory value.
ESP FUNCTION
If the unit has the electronic shockproof
function, it can be shockproof about
several tens of seconds.
RADIO OPERATION
• SWITCHING TO RADIO MODE
Press MODE button (6) shortly to select
radio mode, the radio mode appears in
the display together with the memory
band and frequency.
• SELECTING THE FREQUENCY BAND
At radio mode, press BAND/ENTER
button (18) shortly to select the desired
band.
The reception band will change in the
following order:
• STATION SELECTION
Press TUNE button (16) or TUNE
button (17) shortly to activate automatic
seek function. Press for more than 3
seconds until “MANUAL” appears on
the display, the manual tuning mode
is selected. If both buttons have not
been pressed for several seconds, they
will return to seek tuning mode and
“AUTO” appears on the display.
FOR WEATHER BAND OPERATION:
Press TUNE button (16) or TUNE
button (17) shortly to choose channel
backward or forward. And the range
of selecting backward or forward is
CH1~CH7. And you can also press
M1~M7 buttons (20~26) shortly to
select CH1~CH7 directly.
• AUTOMATICALLY MEMORY
STORING & PRESET SCAN
-Automatic memory storing
Press AS/PS button (2) for several
seconds, the radio searches from the
current frequency and checks the
signal strength until one cycle search
is finished. And then 10 strongest
stations are stored into the
corresponding preset number button.
-Preset Scan
Press AS/PS button (2) shortly to scan
all station presets saved in memory.
• STATION STORING
The preset buttons (14) can be used
to store 10 stations in each band (FM
1, FM 2, FM 3 and AM1, AM2) for
convenient access to your favorite
stations.
Programming stations
1. Select the desired band, then
tune in the station you want to
store in memory.
2. Press and hold one of the preset
buttons (14) for more than 2
seconds until the corresponding
preset button number appears.
Repeat steps 1. and 2. to
program additional stations.
Quick tuning
Select the desired band, then press
one of the ten preset buttons (14).
• SCAN
Press SHIFT/SCAN button (13) to set
function to scan mode, which scanning
to higher frequency station with
receivable signal and keep on each
station for several seconds.
12
OPERATION
FM1 FM2 FM3 AM1 AM2