Planar PR Line PR6020 - Manual (Page 15)

12
English
Setting Up
Adjusting the Projected Image
Adjusting the Projector Image Height
Tilt Adjusting Foot Elevator Foot Elevator Button
The projector is equipped with elevator foot for adjusting the
image height.
To raise the image:
1. Press the elevator button  .
2. Raise the image to the desired height angle  , and then
release the button to lock the elevator foot into position.
3. Use screw in feet  to fi ne-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, and then release the button to lock the
elevator foot into position.
3. Use screw in feet  to fi ne-tune the display angle.
1
2 3