Panasonic KX-TG1850NZ - Manual (Page 13)

Making/Answering Calls
13
Making calls
1 Lift the handset and dial the phone
number.
L
To correct a digit, press {C/T}, then
enter the correct number.
2 Press {C}.
3 When finished talking, press {ih} or
place the handset on the base unit.
Speakerphone
The handset features a digital
speakerphone, which allows you to have
hands-free conversations.
1 During a conversation, press {s} to turn
on the speakerphone.
L
Speak alternately with the caller.
2 When finished talking, press {ih} or
place the handset on the base unit.
Note:
L
For best performance, please note the
following:
– Use the speakerphone in a quiet
environment.
– If you or the other party have difficulty
hearing each other, press {e} or {v}
repeatedly to adjust the speaker volume
as necessary.
L To switch back to the receiver, press
{C}
.
To adjust the receiver or speaker volume
Press {e} or {v} while talking. 4 volume
levels are available for the receiver. 6 levels
are available for the speaker.
Redial feature
Previously dialled phone numbers (each 24
digits max.) can be redialled.
To redial the last number dialled
Press q (right soft key), then press {C}
or {s}.
L
If {s} is pressed, the unit will redial
automatically if the other party’s line is
engaged.
Note:
L
You can also press {C} or {s} before
pressing q.
To make a call using the redial list
The last 10 phone numbers dialled are
stored in the redial list.
1 Press q (right soft key).
L The last number dialled will be
displayed.
2 Press {e} or {v} repeatedly to select
the desired number.
L To exit the list, press {ih}.
3 Press {C} or {s}.
L If {s} is pressed, the unit will redial
automatically if the other party’s line is
engaged.
To redial automatically
If you press {s} when redialling and the
other party’s line is engaged, the unit will
redial the phone number again
automatically. The unit will redial up to 9
times. While the handset is waiting to redial,
{s}
will flash. While the handset is
redialling, mute is automatically turned on.
Note:
L
Automatic redial is cancelled when any
button (except q) is pressed.
L
If mute does not turn off after the line is
connected, press {C/T}.
To edit a number in the redial list before
calling it
1 Press q (right soft key).
2 Press {e} or {v} repeatedly to select
the desired number, then press $.
TG1850NZ(e).book Page 13 Monday, December 27, 2004 3:22 PM