04 getting started, Switching on and setting up, Getting started – Pioneer DV-LX50 User Manual
Page 20

04
20
En
Chapter 4
Getting started
Switching on and setting up
When you switch the player on for the first time the Startup
Navigator screen appears. We recommend using this to make a few
basic player settings.
1
Switch on your TV and set the video input to this player.
2
Press the
STANDBY/ON button on the remote control or
the front panel to switch on.
• When you switch on for the first time, your TV should display the
Startup Navigator screen.
• When you have this unit connected to a plasma television that is
compatible with HDMI Control, language settings are imported
from the plasma television’s OSD settings before Startup
Navigator begins.
3
Use the
/ buttons to choose a language, then press
ENTER.
Taiwanese model only:
4
Press ENTER to start setting up using the Startup Navigator.
If you don’t want to use the Startup Navigator, press
to select
Cancel, then press ENTER to exit the Startup Navigator.
5
Use the
/ buttons to select the terminal from which the
audio signals are to be output, then press ENTER.
• If you have selected
Analog, proceed to step 6.
• If you have selected
COAX/OPT, proceed to step 7.
• If you have selected
HDMI or I don’t know, proceed to step 8.
6
Use the
/ buttons to select whether to output the
analog audio signals from the 2ch or 5.1ch audio outputs, then
press ENTER.
7
Use the
/ buttons to select whether or not to convert
the digital audio signals output from the DIGITAL AUDIO OUT
(COAXIAL/OPTICAL) into linear PCM format (‘Yes’ or ‘No’), then
press ENTER.
• Proceed to step
8.
DVLX50_IBD_EN.book 20 ページ 2007年9月12日 水曜日 午後4時16分