Pelco VBP3000 - Manual (Page 5)

2. Refer to Figure 2. For use in a vehicle, take the cigarette lighter socket adapter from
the lower compartment, plug one end into the DC IN 12V jack on the rear of the unit,
slide the cord through the slot in the bag, and plug the other end into the cigarette
lighter socket.
Figure 2
F. Powering the Detached Monitor or the Additional Monitor
1. The attached monitor can be detached from the system by depressing the button below
the screen with one hand and removing the monitor with the other (Refer to Figure 13 Item
#13.). You may take the additional monitor from the bag. Take the AC/DC adapter from
the lower compartment, plug one end into the DC IN 12V jack on the left side of the
monitor, and the other end into the power receptacle indoors.
Figure 3
2.Refer to Figure 4. For use in a vehicle, take the cigarette lighter adapter from the lower
compartment, plug one end into the DC IN 12V jack on the left side of the monitor and
the other end into the cigarette lighter socket.
Figure 4
5