Philips Mercury Sable 1996-1999 - Manual (Page 9)

6
16
3
Wiring - 2
5. Guide the new wire harnesses from both sides of the vehicle down to the bottom of the driver side door frame. Roll over part of the carpeting along
the door frame to expose the electrical wiring. Locate the GREEN WITH ORANGE STRIPE wire from within the wire bundle. Turn the ignition
key so that electrical power is on and activate the driver side turn indicator. Probe the wire with the wire tester to verify that flashing turn indicator
power is present. Label that wire as ‘driver side turn’.
6. Locate the ORANGE WITH BLUE STRIPE wire from within the wire bundle. Activate the passenger side turn indicator and probe the wire with
the wire tester to verify that flashing turn indicator power is present. Label that wire as ‘passenger side turn’.