Installing battery in the remote control – PYLE Audio PHST90IBGL User Manual
Page 10
When setup alarm, choose alarm option on the second-level subpage, the operation is similar to the
clock setup. After finish the alarm setup, touch "
" key to return the third-level subpage for the
on/off option of alarm.
Installing Battery in the Remote Control
Problem
Possible Reasons/solutions
The system has no power.
No sound at all.
Either of the main channels has
no sound.
LCD screen displays abnormally.
The plug is not inserted properly.
The socket has no power.
The fuse is broken.
POWER button has not been pressed.
"
"
Incorrect selection of input signal.
If mute state is turned on.
Sound source machine is not powered.
The signal plug is connected incorrectly or
lines are short-circuited.
It may be effected by exterior strong disturbance,
turn off first and then turn on again.
Avoid direct sunlight/heat.
Notes about the Remote Control
Trouble Shooting
How to Play FM Tuner by Touch Key Control System
Take the above operation instruction (2)a for reference.
"
"
"
"
"
"
"
"
"
,
"
"
"
"
"
"
,
"
"
"
"
,
"
"
"
"
,
"
"
"
When the cursor points to the tuner control
area , touch
key to enter ADJUST option, you can change the needed option through
key, then touch the
key to enter ADJUST status, then touch
to up or to down and the
tuner will search manually; choose and enter AUTO status, and then touch
to up or down
once( to up, the FM frequency will decrease, otherwise opposite), the tuner will search automatically.
If you want to save the program, just enter the MEMORY status, then Press
to choose the
channel you want to save. At last, press the
once again.