beautypg.com

Your pyle pro series performance mixer, Features and controls: pyd1100 mixer, Owner’s manual table of contents – PYLE Audio PYD1100 User Manual

Page 2: Input/output features

background image

Stereo Line Inputs let you connect

most high-level audio sources, such as

CD players, tape deck, tuner or VCR.

MIC 2

LL

R

GND

L

R

L

R

L

R

L

R

L

R

L

R

Master

Booth

Rec

OUTPUT

Line 7

Line 6

Line 5

Line 5

Phono 2

/Line 4

LN 4

PH 2 Line 3

Phono 1

/Line 2

LN 2

PH 1

Line 1

CH 4

CH 3

CH 2

CH 1

INPUT

FUSE F 500mA 250V

~AC INPUT

VOLTAGE

Your PYLE PRO Series Performance Mixer

is a sophisticated control center, perfect for mixing sound from multiple playback sources such as

microphones, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly

constructed for home or professional use. Wide range volume controls permit you to adjust sound levels

accurately to achieve just the right mix for playing through your speaker system or for recording.

Please read this manual thoroughly before you attempt to set up and use the mixer. It contains a

range of suggestions and instructions to insure safe usage. Set up and used properly, you can expect

years of trouble-free service from this product.

Features and Controls: PYD1100 Mixer

Pyle Pro Mixer Owner’s Manual – 1

i – Pyle Pro Mixer Owner’s Manual

Owner’s Manual Table of Contents

Input/Output Features

Features and Controls: PYD 1100

Presetting Controls Before Use

Connecting the Mixer Inputs

Connecting the Mixer’s Outputs

to Amplifiers

to Recorders

to Booth Speakers

Using Headphones

Using the Mixer Controls

Turning On the Mixer

Monitoring (”Cueing”) Inputs

Mixing Inputs

Adding Equalization to the Mix

Using the MicrophoneTalkover Mode

Microphone Tone and Level Controls

Using the Crossfader

Troubleshooting

Care and Maintenance

Specifications

Warranty

i

1

2

4

5

6

7

8

9

Input/Output Features:

Ground Screw

for turntables

Dual Purpose Stereo Inputs for

using a turntable with a magnetic

cartridge OR a high level input

source

MIC2 Microphone

connector permits

you to connect a

balanced or

unbalanced low

impedance microphone

with 1/4” plug.

Input Select Switches – set these

switches based on what is plugged

into Phono1/Line2 and Phono2/Line4

input jacks

Output Jacks to connect the mixer to a

receiver or amplifier

Booth Output Jacks to connect the mixer

to a second receiver or amplifier powering

speakers in the DJ booth or in a remote

location

Record Output Jacks to connect the

mixer to a tape deck for recording the

mixed program

Headphone Jack

Accepts headphones with

1/4” plug

Headphone Level Control

Headphone CUE/PGMControl Allows you to listen simultaneously

or separately to the CUE material or the active program

Booth Level Control Lets

you control the mixer’s

overall BOOTH volume level,

if you set up remote speakers

or DJ booth monitors

Master Level Control

Lets you control mixer’s

overall volume level

Crossfader Slider Control Allows you to smoothly switch between

the input sources to Channel 2 and Channel 3

MIC Talkover Allows you to lower the

level of the input sources so you can talk

them using the DJ Mic

MIC1 Level Controls Lets you control the

MIC levels as they enter the mix

MIC1 Tone Controls

3-Band Equalizer Allows you to tailor the mixer output to suit your

taste or performance environment. Each frequency range can be

cut or boost by up to 10dB.

Dual VU Meter Indicates the levels of Left and Right Master Channels

Channel CUE Switch Allows you to monitor the selected audio

input source and prepare it prior to mixing it in.

Channel Input Selector Lets you choose the input source to play

for each channel

MIC 1 Combo Input Jack For

connecting a balanced or unbalanced

low impedance microphone with XLR-

type or 1/4” plug

Channel Level Slider Control