Philips FC9166-9160 - Manual (Page 7)

The translucent display panel is made of recyclable polycarbonate (>PC/ABS<).
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled
properly and in accordance with the instructions in this user manual, the appliance is safe to use
according to scientific evidence available today.
Preparing for use
hose
1 To connect the hose, push it firmly into the appliance (‘click’) (Fig. 2).
2 To disconnect the hose, push the buttons and pull the hose out of the appliance (Fig. 3).
Tri-scopic tube
1 To connect the tube to the handgrip, press the spring-loaded lock button on the handgrip
and insert the handgrip into the tube. Fit the spring-loaded lock button into the opening in
the tube (‘click’) (Fig. 4).
2 To disconnect the tube from the handgrip, press the spring-loaded lock button and pull the
handgrip out of the tube.
3 Adjust the tube to the length you find most comfortable during vacuuming. Press one of the
two collars downwards and pull the tube part above the collar upwards or push it
downwards (Fig. 5).
Keep the tube away from your face when you extend it. The tube is very long.
Tri-Active nozzle
1 To connect and disconnect the Tri-Active nozzle, use the same method as for the tube.
The Tri-Active nozzle is a multi-purpose nozzle for carpets and hard floors (Fig. 6).
The side brushes catch more dust and dirt at the sides of the nozzle and allow you to clean better
along furniture and other obstacles.
The opening at the front of the nozzle allows you to vacuum larger particles (Fig. 7).
2 Hard floor setting: push the rocker switch on top of the nozzle with your foot to make the
brush strip come out of the housing. At the same time, the wheel is lifted to prevent
scratching and to increase manoeuvrability (Fig. 8).
3 Carpet setting: push the rocker switch again to make the brush strip disappear into the
nozzle housing. The wheel is lowered automatically (Fig. 9).
Crevice nozzle, small nozzle and brush nozzle
1 To connect the crevice nozzle (1), the small nozzle (2) or the brush nozzle (3), use the same
method as for the tube. (Fig. 10)
Connect the nozzles directly to the handgrip of the hose or to the tube.
Accessory holder
The accessory holder can be snapped onto the handgrip (Fig. 11).
To store nozzles in the accessory holder, push them into the holder. To detach the accessories, pull
them out of the holder.
You can store two accessories at a time in the accessory holder:
Crevice nozzle and small nozzle (Fig. 12).
Please note how the small nozzle must be placed in the accessory holder.
Crevice nozzle and brush nozzle (Fig. 13).
-
-
-
-
-
-
English 7