Philips MC132DMG - Manual (Page 22)

TRACKING MUTE REC/OTR
SPEED MEMORY
0
8 9 7
5 6 4
2 3 1
PAUSE/STILL
ALT.CH
STOP
F.FWD
PLAY
REW
VOL.
STATUS/EXIT
MENU
POWER SLEEP/WAKE UP
CH.
CLEAR
F.FWD/B Button
When tape playback is stopped, press to fast forward the tape at
high speed. During tape playback, press to fast forward the tape
while the picture stays on the screen. Details are on page 41.
Press to change the setting of a menu item or to go to the next
menu.
CH(annel) o / p Buttons
Press to scan through the TV/VCR’s available channels.
MENU Button
Press to display the main menu. You also may use the buttons on
the front of the TV/VCR to access the main menu. Details are on
page 20.
PLAY/ ▲ Button
Press to play a tape. Details are on page 28. Press to release Search
or Still mode and return to normal playback. Details are on page 41.
Press to select an item in the menu.
SLEEP/WAKE UP Button
Press to set the Sleep Timer. Details are on page 47. Press to set the
Wake Up Timer. Details are on page 48.
SPEED Button
Press to select the recording speed (SP or SLP).
22 Remote Control Buttons
VOL(ume) o / p Buttons
Press to adjust the sound level. If you press the VOL(ume) o / p
buttons when the sound is muted, the sound will be restored.
POWER Button
Press to turn on or off the TV/VCR.
REW(ind)/{ Button
When tape playback is stopped, press to rewind the tape at high
speed. During tape playback, press to rewind the tape while the pic-
ture stays on the screen. Details are on page 41.
Press to change a setting of a menu item or to return to a previous
menu.
REC(ord)/OTR Button
Press once to start a recording. Details are on page 29. Or, press
repeatedly to start a One-Touch Recording (an immediate timed
recording, 30 minutes to eight hours long) of the channel you are
watching. Details are on page 30.
Number Buttons
Use to select channels and to program TV/VCR functions (such as
setting the clock).
● Cable Users
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 6, press 0,6. If you only press the
Number 6 button, channel 6 will be selected after a brief delay. (There
also may be a brief delay when you select channels 10, 11, and 12.) If
you want to select channels 100 and above, enter channel numbers as a
three-digit number. For example, to select channel 117, press 1, 1, 7.
● Antenna Users
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 5, press 0,5. If you only press the
Number 5 button, channel 5 will be selected after a brief delay. You
may only select channels 2-69.
MC132DMG/MC192DMG 3/22/02 1:21 PM Page 22