Patton electronic SMARTNODE 4110 - Manual (Page 65)

Introduction 65
SmartNode 4520 & 4110 Series User Manual C • Cabling
Introduction
This section provides information on the cables used to connect the SmartNode and the interface cards to the
existing network infrastructure and to third party products.
Serial console
The SmartNode can be connected to a serial terminal over its serial console port, as depicted in figure 29 .
Figure 29. Connecting a serial terminal
Note See section “Console port” on page 71 for console port pin-outs.
The Interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
CAUTION
Console
VoIP
Gateway Router
ToIP
Integrated
Access Device
SmartNode 4524
Link
100M Activity
0/0 0/1
0/2 0/3
En et 0
Vo ice Po rts
Power Run
V oIP
Link
Link 100M
Activity
En et 1