Philips AJ3110 - Manual (Page 6)

English
CONTROLS
1 SET TIME - sets the clock time
2 SLEEP - activates the radio for sleep function
3 ALARM SET/OFF - sets the alarm time
- stops the active alarm for 24 hours
4 ALARM indicator - lights up when alarm is activated
5 DISPLAY - shows the clock/ alarm time and status of the set
6 Frequency indicator - shows the radio frequency of your selected waveband
7 HOUR/MINUTE - adjusts the hours/minutes for the clock and alarm time
8 REPEAT ALARM/SLEEP OFF - switches off the active alarm for a 8-9 minute period
- switches off the radio sleep function
9 VOLUME - adjusts the sound level
0 BAND - selects FM/AM waveband
! TUNING - tunes to radio stations
@ RADIO/ALARM
– RADIO ON switches on the radio
– OFF switches off the radio/alarm
– ALARM - RADIO activates the radio for alarm
– ALARM - BUZZER activates the buzzer for alarm
# Battery door - opens to store a 9 volt 6F22 type battery (not included) for
clock memory backup
$ Power cord - connects to wall outlet
% Pigtail - FM antenna to improve FM reception
CAUTION
Use of controls or adjustments or performance of procedures other than
herein may result in unsafe operation.
This set complies with the radio interference requirements of the
European Community.