PEAK-System Technik PCAN-DONGLE IPEH-002019 - Manual (Page 14)

PCAN-Dongle (ISO) – User Manual
Figure 4: Selection of the CAN specific parameters
If no entry is in the list "Available CAN hardware" (for example at
the first program start), you need to add one:
1. Press the button Add. The dialog box "Add CAN hardware"
appears.
2. Select the connected hardware and the operating mode
from the list "Type of CAN hardware". If the mode of the
parallel interface is set to ECP in the PC's BIOS setup, you
can register the PCAN-Dongle as "PEAK Dongle-CAN SJA
EPP".
14