Philips SJM3141 - Manual (Page 4)

4
What can you do with the
SJM3140 and SJM3141
• Connect the Dock to your computer with the USB cable,
and then place your iPod in the Dock to sync and charge the
battery. No more reaching behind the computer to plug it in.
• Connect the Dock to an electrical outlet using the Power Adapter,
and then place your iPod in the Dock to charge the battery.
• Connect the Dock to a stereo or speakers using the supplied
stereo audio cable to play music from iPod.
• Display photos or video on a TV or other video device using the
supplied S-video cable if you have an iPod with a color display.
Setup for your Docking Station
1. Remove all package contents
2. Locate your dock near your Computer, Stereo or TV.
3. For Sync and Charging , Connect one end of the supplied USB
cable to the USB port on your computer and the other end of
the cable to the jack labeled USB on your docking station.
4. For Stereo Playback, Connect the Red and White RCA
connectors on one end of the supplied Audio cable to the
Audio in RCA jacks on your stereo, connect the other end with
3.5mm plug to the jack labeled Audio on your docking station.
5. For Video and Photo Playback, Connect one end of the supplied
S-Video cable to the S-Video in jack on your television, connect
the other end to the jack labeled S-Video on your docking station.
6. Connect the Power cord to an electrical Outlet and the other
end of the power cord to the DC 12V jack on the back of your
docking station .
7. Remove the plastic tab from the Remote (SJM3141 only)
Playing Music through
External Speakers or a Stereo
Using the iPod Dock, you can play music from your iPod over
externally powered speakers or a home stereo. The Dock includes a
stereo audio cable with RCA plugs. This cable is used with speaker
systems and home stereos with Audio in RCA Jacks. Some speaker
systems will only have a 3.5mm audio in jack. With this type of
speaker system you will need to use an audio cable with 3.5mm
stereo plugs on both ends .
(A standard 3.5mm to 3.5mm audio cable is not included.)
To use your iPod with the Dock to play
your music through speakers or a stereo:
1 . Insert the appropriate dock adapter
for your specific iPod model.
2. Place iPod in the Dock.
3 . Use the supplied audio cable to connect the
Dock’s Audio out jack to your home stereo
or speaker system’s Audio in RCA jacks.
Installation
EN