Specifications, Highlights – Philips WP3890/01 User Manual
Page 2
Issue date 2010-12-24
Version: 10.1.1
12 NC: 0000 000 00000
© 2010 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Specifications
WP3890/01
UV water purifier
UV Class A
Highlights
Power UV+
Advanced state-of-the-art UV (PLS) technology
destroys known waterborne viruses,
bacteria,parasites and amoebae while the activated
carbon and sediment filter removes turbidity,
chlorine, volatile organic chemicals (VOCs), cysts,
larger micro-organisms and improves taste.
Tilt and Twist
Replacing the filter is something you can easily do
yourself thanks to the simple Tilt and Twist
mechanism.
PowerSave
This appliance has low electricity consumption and is
rated at 25 watts. To make it even more energy
efficient, the UV lamp switches off when the
appliance has not been used for 10 minutes.
Hi-flow
The maximum flow rate of 1.2 litres per minute
ensures that you have safe drinking water available at
any time.
Certified by BIS
Product is certified according to microbiological
performance standard BIS 14724 and Drinking water
standard BIS 10500 by the Bureau of Indian
Standards
Musical reminder
While the purifier is dispensing water, an optional
musical reminder will notify you that the dispenser is
on.
Gold Seal by Water Quality Association
(WQA), USA
WQA (Water Quality Association, USA) only
awards the Gold Seal to those systems, components
or additives that have met or exceeded industry
standards for contaminant reduction, structural
integrity and material safety. This product is certified
by WQA to conform to NSF/ANSI 42 for the
removal of chlorine and particulates (removes all
classes of particulates from Class I till Class VI -
particle size 0.5µm till 80 µm), NSF/ANSI 53 for the
removal of turbidity, volatile organic chemicals
(VOCs) and cysts and NSF/ANSI 55 Class A for
microbiological dis-infection.
Tested by KIWA Water Research, The
Netherlands
Tested by Kiwa Water Research: Microbiological
performance tested by Kiwa Water Research (The
Netherlands) according to the NSF standard 55,
Class A protocol (2004).
PureProtect alert
After 2700 litres of water consumption, PureProtect
alert sends out a signal. There will still be enough
capacity for another 300 litres after the signal.
General specifications
• Frequency: 50 Hz
• Voltage: 220-240 V
• Water flow rate: max 1.2 l/min
• Power rating: 25 W
Design specifications
• Product weight: 3.6 kg
• Product dimensions (L x W x H): 287 x 156 x
422 mm
Purification system
• PLS UV lamp: 9 W
Water input conditions
• Max. input water temperature: 45 °C
• Max. input water pressure: 2.0 Bar
• Min. input water pressure: 0.5 Bar
• Min. input water temperature: 5 °C
•