PYLE Audio PAVS001 - Manual (Page 2)

1 2
3 4
Please refer to the figures in the process.
Fig
. Open the box and take out the 6 pieces of Long bolts (A) as well as
Top glass panels(K). Put the base glass panel onto some flat floor, note the
surface with bolt holes up. Then put the tip of the bolt into the holes.
Fig
.Insert the short wood lock ( F), short joint stick(C) at the showed
position.
Fig
. Carefully attach the Middle glass panel(M) to the right position,
then add Long joint stick(D), Long wood block(B).
Fig
. Put on Connect wood bar(J) against each two long joint sticks on the
left and Right side.
Fig
.Attach the Base glass(L)( flat surface up), and add the washers one
by one.
Fig
.Install the screw nuts.
Fig Install the Foot support(E).
Fig .Turnover the whole cabinet and finish the whole installation.
①
②
③
④
⑤
⑥
⑦.
⑧
-3- -2-
Contents of the box: Hardware shown as actual size Contents of the box: Hardware shown as actual size
WARNING
Installation
A
B
C
D
E
F
G
H
I
J
K
L
6
1
4
4
4
1
6
6
6
2
1
1
1
Long bolt
Long wood block
Short joint stick
Lang joint stick
Foot support
Short wood block
Nut
Nylon washer
Metal washer
Connect wood bar
Top glass panel
Base glass panel
Middle glass panel
Description Letter Qty
M
A B C D
E
F
G H I
J
K L M
Please read this guide before installation.
Ensure the correct installation. The Max load is 60kg/132lbs.
Keep away from high frequency or power equipment to avoid disturbance.
Choose flat floor to put this product.
We can not be responsible for any damage caused by wrong installation.
A
K
C
F
M D
B
J
Caution:
This Product LCD /Plasma Wall Mount Bracket is intended
for use only with the maximum weights indicated .See apparatus
instructions .Use with products heavier than the maximum weights
indicated may result in instability causing possible injury .
Caution: