Philips 14PV182/58 - Manual (Page 9)

7
On Screen Display (OSD)
You can switch OSD on or off.
1 Press the MENU button.
2 Select and confirm the ’FEATURES’ line.
FEATURES v w
PP RECALL
ON TIMER
SLEEPTIMER
0
DISPLAY FULL
CHILD LOCK OFF
SET CLOCK
3 Select the ’DISPLAY’ line.
4 Select one of the options indicated.
’FULL’: OSD appears for a few seconds each time an
operating mode is selected and then disappears.
’OFF’: OSD is switched off.
’PROG’: only the programm number appears.
’COUNT’: only the counter appears.
5 Confirm it with the MENU button.
Note: With the OK button you can superimpose the
actual operating mode on the TV screen.
Personal Preset
You can make your personal picture and volume settings
here. You can call up this setting and it will be used
automatically when you switch the set on.
1 select your personal setting. (see chapter ’The TV set
functions’). Press the
D button and the C button
simultaniously.
2 Select and confirm the ’PP STORE’ line.
3 To end press the MENU button. The personal setting
has been stored.
4 Calling up your Preset: Press the MENU button.
5 Select and confirm the ’FEATURES’ line.
6 Select and confirm the ’PP RECALL’ line.
7 Press the MENU button. The set will use this setting.
Sleep function (switch off)
You can programme your set to switch off after a predeter-
mined period.
1 Press the MENU button.
2 Select and confirm the ’FEATURES’ line.
3 Select ’SLEEPTIMER’ line.
4 With the D or the C button you can determine
the minutes left until switch off in 15 minutes intervals.
When you set the time to ’0’ with the
CLEAR b button
the sleep function is switched off.
5 Press the MENU button.
Switch set on function
You can programme your set to switch on at a predetermined
time.
1 Press the MENU button.
2 Select and confirm the ’FEATURES’ line.
3 Select and confirm the ’ON TIMER’ line.
4 Determine the time you wish the set to switch on.
5 Select the ’WAKE UP’ line and switch the ’on-timer’ on or
off.
6 Press the MENU button.
4. SPECIAL FEATURES