Perle Systems 5500208-43 - Manual (Page 59)

60
SNMP Commands
Set SNMP engine-id-string
Description Configures SNMP v3 Engine ID.
User Level Admin
Syntax
Options string
Set SNMP inform-timeout
Description Configures SNMP inform traps timeout value.
User Level Admin
Syntax
Options number
Set SNMP inform-retries
Description Configures SNMP inform traps number of retires.
User Level Admin
Syntax
Options number
Show SNMP
Description Shows SNMP settings, including communities and traps.
User Level Admin
Syntax
set snmp engine-id-string
The string entered in this field will be combined with the defined string in hex of
800007AE04 to form the engine id. Ensure each string is unique for each IOLAN. The
default engine id uses the MAC address of the Ethernet interface to ensure that the
engine id is unique to this agent. To set the engine id back to the default, enter a null
string <"">.
set snmp inform-timeout
This is the length of time in seconds, that the IOLAN will wait for the
acknowledgement of the trap. If no ACK is received within this timeframe, the trap
will be re-sent. The default is 1 second.
set snmp inform-retires
This is the number of times the IOLAN will resend a trap which has not been
acknowledged by the receiving end. Once the retries count is exhausted, no further
attempts will be made to deliver the trap. The default is 3 retries.
show snmp