Philips DVD733/051 - Manual (Page 10)

10
3141 015 21101
English Connecting to an Audio System
1 You can also listen to the sound of audio CDs
and DVD video discs by connecting to an
optional stereo system.
2 Connect the Left and Right AUDIO OUT on the
DVD player to the Left and Right AUDIO IN on
the stereo system.
TO VIDEO IN TO SCART IN
OR
MAINS
COAXIAL
CVBS
AUDIO
OUT
L
R
TV OUT
AUDIO SYSTEM
TO AUDIO IN
Connecting to Optional
Equipment
● A digital component with a built-in MPEG 2 or
Dolby Digital™ decoder allows you to enjoy the
surround sound while producing the effect of
being in a movie theater or a concert hall.
● The player outputs the surround sound signals
from the DIGITAL OUT COAXIAL connectors.
If your receiver has a MPEG 2 or Dolby
Digital™ decoder,
1 Connect the COAXIAL DIGITAL AUDIO OUT
of the DVD player to the COAXIAL DIGITAL
AUDIO IN on your receiver.
TO VIDEO IN TO SCART IN
OR
MAINS
COAXIAL
CVBS
AUDIO
OUT
L
R
TV OUT
REAR
SPEAKERS
REAR
SPEAKERS
TO COAXIAL IN
RECEIVER with
MPEG 2 or Dolby
Digital™ decoder
Notes:
–
If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
–
To see the selected audio format of the
current DVD in the Setup Menu, refer to “Setup
Menu”.
Preparation