Preparations, Antenna connection, Speaker connection – Palsonic TFTV817HD User Manual
Page 7: Continued), Tv rear, Ohm coaxial cable (round cable)

5
To Open or Close the Back Cover
Preparations
(Continued)
75-ohm coaxial cable (round cable)
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture
screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Optimum reception of color requires a good signal and will generally mean that an outdoor antenna must be used. The
exact type and position of the antenna will depend upon your particular area.
=
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave
conditions.
=
The antenna cable should not be bundled with the power cord.
TV REAR
RF
Antenna Connection
Note
Push downward and then pull out
the cover carefully to remove the
cover.
Push downward and then pull
out the cover carefully to
remove the cover.
Before you connect external devices with the unit, please remove the
Back Cover firstly. After you finish connecting, aim the Hook toward the
Locating groove, then carefully push the Cover until the Cover locks in
place with a click.
1.Unplug the TV set and all connected components before connecting the speakers.
2.The illustration may be different depending on model.
Connect the speaker audio cable to the external
speaker output jack on the unit matching the "+" and
"-" ends of the cable.
Speaker Connection
Note
(
B
la
c
k
)
(
R
e
d
)
(
L
e
ft
s
p
e
a
k
e
r)
(
R
ig
h
t
s
p
e
a
k
e
r)
(
R
e
d
)
(
B
la
c
k
)