Philips SalonStraight Pro HP4667/00 User Manual

Page 7

For additional protection, we advise you to install a residual current

device (RCD) in the electrical circuit that supplies the bathroom. This

RCD must have a rated residual operating current not higher than

30mA. Ask your installer for advice.

Keep the appliance out of the reach of children.

The straightening plates and the plastic parts near the plates reach a

high temperature quickly. Prevent the hot surfaces of the appliance

from coming into contact with your skin.

Only use the appliance on dry or damp hair.

Do not leave the plates in your hair for more than a few seconds at a

time as this may cause damage to your hair.

Keep the appliance away from non-heat-resistant surfaces and never

cover the appliance with anything (e.g. towel or clothing) when it is

hot.

For safety reasons, the straightener automatically switches off after

having been on for 1 hour.

Always unplug the appliance after use.

Do not wind the mains cord round the appliance.

Wait until the appliance has cooled down before you store it.

Keep the straightening plates clean and free of dust, dirt and styling

products such as mousse, spray and gel. Dust, dirt and styling

products may cause damage to the ceramic-coated straightening

plates.

Always return the appliance to a service centre authorised by Philips

for examination or repair. Repair by unqualified people could cause

an extremely hazardous situation for the user.

The plates have a ceramic coating. This coating slowly wears away

over time. This does not affect the performance of the appliance.

If you use the appliance on colour-treated hair, the straightening plates

may stain.

The maximum temperature occurs just after heating up. The actual

temperature during use may be lower.

Keep the appliance away from flammable items.

EnglisH