POLAR IRDA USB 2.0 - Manual (Page 18)

5. Establishing IrDA connection with another infrared device
Product name
Polar
Manual name
Contents
1. General
2. Driver Installation
3. Hardware Installation
4. Detection
5. Establishing IrDA connection with another infrared device
6. Remove Polar IrDA 2.0 USB Adapter from the computer
7. Uninstallation
8. Troubleshooting
9. Technical Specifications
10. Limited Polar International Guarantee
11. Polar Disclaimer
Download and print full manual (.pdf)
5. Establishing IrDA connection with another infrared device
After confirming the detection of USB 2.0 IrDA Adapter, place your Polar infrared device and its IR
window within one meter (39 inches) range from the infrared window at the end of the Adapter. The
Polar device will be detected if it is within a 30 degree angle from the infrared window of the Adapter.
Leave a minimum of 1 cm (0.4 inches) space between the devices.
An icon and a popup message will appear in the Toolbar indicating the Adapter is recognizing another
infrared device within its range:
file:///C|/Documents and Settings/hekdahl/Desktop/FSU/ch05.html (1 of 2)10.4.2007 12:56:10