P 7 specifications – Parasound HALO P 7 User Manual
Page 26
26
P 7 SPECIFICATIONS
Frequency Response
5 Hz – 100 kHz, +0/-3 dB
THD Distortion
< 0.006% at 20 kHz
S/N Ratio
> 110 dB, input shorted, IHF A-weighted
> 95 dB, input shorted, unweighted
Crosstalk
85 dB at 20 kHz
Line Input Impedance
Unbalanced: 14.2k Ω
Balanced: 4.7k Ω per leg
Phono Input Impedance
MM setting: 47k Ω
MC setting: 100 Ω
Output Impedance
Unbalanced: < 60 Ω
Balanced: < 60 Ω per leg
Input Sensitivity
200 mV for 1 V output
Total Gain: 14 db (Volume limiter set to 110)
Maximum Output: 8 V (Vol. Limiter set to 110)
XLR Pin Identifi cation
1 = Ground (Shield)
2 = Positive
3 = Negative
AC Power Requirement
100 – 250 V 50 – 60 Hz
(voltage is automatically selected)
10 watts standby
65 watts when turned on
Dimensions
Width: 17-1/4” (437mm)
Depth: 13-3/4” (350mm)
Height, with feet: 4-1/8” (105mm)
Height, without feet: 3-1/2” (89mm)
Weight
Net: 13.5 lbs. (6.1 Kg)
Shipping: 20.5 lbs. (9.3 Kg)
Rack Mount Accessory
HRA 2 (May be purchased separately)
Note: Specifi cations and features subject to change or improvement without notice.
Note:
Note:
© 2008 Parasound Products, Inc. iPod, Crestron, AMX, Control4, Niles and Elan are registered trademarks. Rev. 0.9