Pioneer DV-C302D - Manual (Page 27)

27
1
Press STOP
7 (7 on the front panel).
Playback stops.
2
Press OPEN/CLOSE
0 (0 on the front panel).
• The disc table comes out.
• The tray rotates and the disc that was playing is
located towards the front on the left side of the
table.
3
Remove the discs.
4
Press the DISC CHANGE to remove all discs.
5
Press ( STANDBY/ON on the front
panel).
Resuming playback from where
you stopped
–– DVD/Video CD
With this player, it is possible to resume play of a DVD or
Video CD when play has been stopped.
Press STOP 7 once to enable play to resume
from a point shortly before the DVD/Video CD was
stopped when PLAY
3 is pressed again.
• To begin disc playback from the beginning, press
STOP
7 twice to turn off resume playback, and then
start playback again.
• Pressing STOP
7 twice to causes the disc to return to
the beginning when PLAY
3 is pressed again.
Note
Resume play is only possible when the disc is loaded and
STOP
7 has not be pressed twice in succession (“RESUME” ap
pears in the display). If you want to continue viewing a DVD at a
later time or date, it is recommended to use the Last Memory
function described on page 50.
Stopping Playback and
Switching Power Off
– DVD/Video CD/CD
STANDBY/ON
4 1 ¢ ¡
7 8 3
0
5 1
2 3 4
5
5
5
5
4 ¢
1
8 7 e E
¡ 3
1
2 5
GETTING ST
ARTED USING YOUR DVD PLA
YER
STANDBY/ON
4 1 ¢ ¡
7 8 3
0