Peavey TNT User Manual
Page 10
10
TWEETER SWITCH
5IJTTXJUDIUVSOTUIFUXFFUFSPOPò6TVBMMZXIFOUIF$36/$)FòFDUJTFOHBHFE
UIJTTXJUDIXPVME
be switched to the OFF position.
EXTERNAL SPEAKER OUTPUT
Speakon™ type powered output for powering a passive enclosure.
FOOTSWITCH JACK
1MVHZPVS5/5GPPUTXJUDIJOUPUIJTKBDL5IFGPPUTXJUDIDPOUSPMTUIFDSVODIFòFDUBOEUIFDPN-
QSFTTPSPOPò/05&
The crunch and compressor buttons MUST be pushed in to operate with the footswitch.
EFFECTS LOOP
The Send Jack provides a pre amp output that may be used to drive slave amplifiers and external
effects processors. The Return Jack provides a power amp input for the last effect in the chain. NOTE:
When using the unit as a slave power amplifier, the Return Jack should be used as the input.
GROUND LIFT
5IJTCVUUPOJTQSPWJEFEUPQSFWFOUBHSPVOEMPPQUIBUNBZSFTVMUJOIVNOPJTF8IFOEFQSFTTFE */
position), Ground Lift is engaged.
DIRECT INTERFACE (DI)
This is a built-in, balanced Direct Interface is used to send a buffered, unprocessed signal to an
external mixer.
19
20
21
22
23
24