Philips DVD743 - Manual (Page 16)

16
English
Preparation
– Analogue output
Select Stereo, Dolby Surround compatible or 3D
Sound (Trusurround) output to match your
system’s playback capability.
– Night Mode
When set to ON, the dynamics of your sound
output are optimised. High volume outputs are
softened, enabling you to watch your favourite
action movie without disturbing others.
– Subwoofer cut-off
The frequency of the subwoofer output can be
set to HIGH (200Hz) or LOW (100Hz) to
match your system’s playback sound quality.
– PCM Output
Allows to select PCM digital output between
48kHz and 96kHz. When 48kHz has been
selected, 96kHz PCM data (if available on disc)
stream will be converted to 48kHz.
Some 96kHz DVD are copy protected. If your
PCM output selection is 96kHz, the digital output
will be muted to comply with the standards. In
such cases, select 48kHz to enable digital output.
– Karaoke vocal
Put this setting to ON only when a multi-channel
karaoke DVD is being played. The karaoke
channels on the disc will then be mixed into a
normal stereo sound.
Language
Selecting disc languages:
Menu/Audio/Subtitle language
● This is to select the audio language, subtitle
language and the language used in TV screen
menus or DVD menus which will always be used
for every disc to be played back.
● If the language selected is not available on the
disc, the default language designated by each disc
will be selected.