Polaris 4X4 500 EFI - Manual (Page 67)

64
MAINTENANCE
Gearcases
Transmission (Main Gearcase)
Oil Change
The drain plug is located on the
bottom of the transmission.
Access the drain plug through the
drain hole in the skid plate.
1. Remove the fill plug.
2. Place a drain pan under the
drain plug.
3. Remove the drain plug. Drain
the oil.
4. Wipe the magnetic end of the
drain plug clean to remove
accumulated metallic filings.
5. After the oil has drained
completely, install a new
sealing washer.
NOTE: Refer to the Gearcase Specifications Chart on page 63 for recom-
mended lubricants, capacities and torque specifications.
6. Reinstall the drain plug. Torque to specification.
7. Add the recommended oil as needed. Do not overfill.
8. Reinstall the fill plug. Torque to specification.
9. Check for leaks.
10. Dispose of used oil properly.
Drain Plug