Palsonic PVP100 - Manual (Page 16)

Playback in Car
15
With the carry bag and power cord special for car use attached, you can also enjoy
movies in your car!
Please kindly refer the following instructions to setup the player:
1. Connect one tip of the power cord to the player, and the other to the standard 12V
jack in the car.
Note: This power cord can not be used for
charging, just for playback only.
Offload the battery before you use the car
adaptor as power supplier.
Please make sure the power of your car
is 12V DC.
2. Put the player in the bag, fix it with the belt in the carry bag, see the picture following:
3. Then you can hang the bag on the back of the seat, and enjoy your movies freely.
Operations for playback please refer Function Instruction behind.
Note:
Please insert the car adapter cord from the hole on the left-bottom of the carry bag to the
power input jack on the left side of player.
Another hole under the handle is for earphone cord.