Panasonic DMC-FX50 - Manual (Page 97)

Connecting to other equipment
97
VQT0Y19
3 Move to select [PRINT START]
and then press [MENU/SET].
• [PRINT WITH DATE] and
[NUM. OF PRINTS] are not displayed
when [DPOF PICTURE] is set.
• Press [MENU/SET] to cancel printing.
• When you select [MULTI SELECT],
[SELECT ALL] or [FAVORITE], a print
confirmation screen appears. Select
[YES] and print the pictures.
• The message [PRINTING ##
PICTURE(S) DO YOU WANT TO
PROCEED ?] appears on the print
confirmation screen if the number of
prints is more than 1000.
4 Disconnect the USB connection
cable after printing.
w Setting date printing, the number of
prints, the paper size and the page
layout
Select and set each item in step 3 .
• Items not supported by the printer are
displayed in gray and cannot be selected.
• When you want to print pictures in a paper
size or a layout which is not supported by
the camera, set [PAPER SIZE] or
[PAGE LAYOUT] to [
] and then set the
paper size or the layout on the printer. (For
details, refer to the operating instructions
of the printer.)
• [PRINT WITH DATE]
• If the printer does not support date
printing, the date cannot be printed on the
picture.
• [NUM. OF PRINTS]
Set the number of prints.
• You can set up to 999 prints.
• [PAPER SIZE]
(Paper sizes that can be set with this unit)
The paper sizes are displayed on pages
1/2 and 2/2. Move
to select.
_These items cannot be displayed when
the printer does not support the paper
sizes.
OFF
MULTI SELECT
NUM. OF PRINTS 1
PRINT WITH DATE
PAPER SIZE
PAGE LAYOUT
SELECT CANCEL SET MENU
PRINT START
/SET
MENU
Settings on the printer are
prioritized.
[OFF] Date is not printed.
[ON] Date is printed.
1/2
Settings on the printer are
prioritized.
[L/3.5 SM5S] 89 mm M127 mm
[2L/5 S M7S] 127 mm M178 mm
[POSTCARD] 100 mm M148 mm
[A4] 210 mm M297 mm
2/2 _
[CARD SIZE] 54 mm M85.6 mm
[10 M15cm] 100 mm M150 mm
[4 S M6S] 101.6 mm M152.4 mm
[8 S M10S] 203.2 mm M254 mm
[LETTER] 216 mm M279.4 mm