Polk Audio SURROUNDBAR 3000 - Manual (Page 7)

HOW TO CONNECT YOUR BAR
This is really easy, too. You probably have two sources
for a signal: your TV or a cable/satellite TV box.
We recommend you use the optical output from your TV
so you can enjoy the highest quality audio for TV and DVD’s.
In the event that your TV does not have an optical output,
you can use the optical output from your cable/satellite box
and then connect your DVD player using one of the other
SurroundBar 3000 inputs.
HOW TO CONNECT YOUR SUBWOOFER
Your subwoofer receives a wireless audio signal from the bar,
so all you need to do is plug in the power cord. Make sure the
sub’s Channel ID switch is set to the same number as the bar’s
Channel ID switch. (Both Channel ID switches should be set
to the same number out of the box.)
1 2 3 4
CHANNEL ID
FACTORY USE ONLY
2.5A
20V
1 3 2
SOURCE
POWER
ON
OFF
HEADPHONE
OUTPUT
OPTICAL AUDIO
OUTPUT
TV or Cable/Sat Box
SurroundBar 3000
1 2 3 4
CHANNEL ID
1
2
3
4
CHANNEL ID POWER
ON
OFF
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
1
2
3
4
LINK
POWER
ON
OFF
AV INPUT
100V - 240V
50Hz - 60Hz
PROTECT
CHANNEL ID
Customer Service Hours of Operation: Monday-Friday, 9 AM -6 PM EST [email protected] 7