Pyramid Car Audio CDR-39M - Manual (Page 8)

Page 07 Page 06
03 GENERAL OPERATIONS 04 RADIO & CD OPERATIONS
SET THE CLOCK
Press DSP button (9) to recall clock time
display, then press and hold this button for
several seconds until the time is blinking.
And press Vol Up button (4) to adjust
hours and Vol Down button (5) to adjust
minutes.
SELECT MENU/MODE
Press SEL button (3) to move display
through Volume, Bass, Treble, Balance and
Fader (opt.) functions. Use Vol Up (4) and
Vol Down (5) buttons to adjust the
selected mode. When mode has not been
adjusted for several seconds, display returns
to normal radio or CD display.
When switching modes with SEL button
(3), "Bass" and "Treble" will not be shown if
any EQ mode has been enabled.
VOLUME
Press SEL button (3) for 1 time. Adjust
volume level by using VOL Up (4) and VOL
Down (5) buttons.
BASS
For 2 time. Adjust bass level by using VOL
Up (4) and VOL Down (5) buttons.
TREBLE
For 3 times. Adjust treble level by using VOL
Up (4) and VOL Down (5) buttons.
BALANCE
For 4 times. Adjust sound balance between
left and right speakers by using VOL Up (4)
and VOL Down (5) buttons.
FADER (optional)
For 5 times. Adjust sound balance between
front and rear speakers by using VOL Up
(4) and VOL Down (5) buttons.
Press and hold SEL/MENU button (3) for
one second to move display through "EQ,
ESP, Loud, Beep, Stereo/Mono". When mode
has not been adjusted for several seconds,
display return to normal radio or CD mode.
And then use VOL Up (4) and Vol Down
(5) buttons to adjust the selected mode as
follows:
EQ: POP, ROCK, CLASSIC, FLAT, DSP OFF
ESP: ESP 12' or ESP 45'
Loud: Loud On or Loud Off
Beep: Beep On or Beep Off
Stereo/Mono: Stereo or Mono
LIQUID CRYSTAL DISPLAY
The LCD (19) can show the current state of
the unit.
FRONT PANEL RELEASE
Press REL button (2) to detach the
removable front panel.
FLASHING LED
If the front panel is not on the main unit,
LED (20) will be flashing.
RESET BUTTON FUNCTION
RESET button (21) is placed on the
housing and must be activated with either a
ballpoint pen or thin metal object. The
RESET button (21) is to be activated for
the following reasons:
· Initial installation of the unit when all wring is
completed.
· All the function buttons do not operate.
· Error symbol on the display.
VOL BAS TRE BAL FAD
(Volume) (Bass) (Treble) (Balance) (Fader)
OPTIONAL:
BEEP STEREO/MONO EQ ESP LOUD
BAL
(Volume)
VOL BAS TRE
(Bass) (Treble) (Balance)
FM AM
RADIO OPERATIONS
CD OPERATIONS
BAND
Press BAND button (10) to change bands
as below:
SELECT STATION
Rotate TUNING knob (11) clockwise or
anticlockwise to adjust the frequency
upward or downward.
LOCAL/DISTANT
Press the LOC button (12) to select
between local setting for reception of strong
station and distant setting for reception of
weak station when tuning. This function
operates in FM band only.
DISC PLAY
Gently insert a CD with the label side facing
up into the Disc Slot (16). The CD is then
automatically loaded into the unit and starts
playing with the first track of the disc. The
digital display will indicate the track number
and the time of the track.
EJECT
Press Eject button (15) to stop CD
playback and eject CD from the slot.
Receiver switches to radio operation.
PLAY THE FIRST TRACK
Press and hold Play/Pause button (14)
for several seconds to play the first track of
the current disc.
PAUSE CD
Press Play/Pause button (14) to
temporarily stop the playback. Press it again
to resume playback.
SKIP TRACKS
Press Track Forward button (17) or
Track Reverse button (18) to choose the
following track or the previous track. Track
numbers will be shown on display.
FAST FORWARD/FAST REVERSE
Hold Track Forward button (17) or
Track Reverse button (18) for several
seconds to fast forward or fast reverse.
Releasing the button to stop fast forward
and fast reverse playback.
REPEAT
Press RPT button (12) to continuously
repeat playing the current track. Press it
again to cancel the function.
INTRO:
PREVIEW ALL TRACKS
Press INT button (7) to play first several
seconds for each track. Press it again to stop
intro and back to normal playback.
RANDOM:
RANDOM TRACKS PLAYBACK
In CD playback mode. Press RDM button
(8) to play all tracks in the random order.
Press it again to cancel the function.