Philips HALO SURFACE H2220 - Manual (Page 6)

DESCRIPTION
TELEPHONE LEDS
The base station has a green LED:
- Lit, when the base station is powered.
- Blinking, when:
. receiving a call,
. the line is connected or the answering machine is replying.
- Unlit, when the base station is not connected to the power supply.
AUDIBLE SIGNALS
Your telephone emits:
- 1 short beep = when you press a key.
- 1 long beep = when these is no contact between the handset and the base station
any other problem occurs (if you make a mistake).
= to indicate that the handset needs to be recharged
- 2 beeps = when you place the handset on the base station.
= confirming the programming you have entered.
- 3 beeps = in the programming phase, inviting you to continue with the
procedure.
RINGER EQUIVALENCE NUMBER OR REN (UK ONLY)
Your
has a Ringer Equivalence Number (REN) of 1.0. To determine the maximum
number of telephones that can be connected to your line, add together the individual RENs of all
the apparatus you wish to connect. If this total exceeds four, one or all of your telephones may
not ring correctly.
5
ang6120.qxd 31/05/99 15:36 Page 5