Philips HC 8560 - Manual (Page 9)

Wrong battery orientation Reposition the batteries according to
the engraved polarity symbol.
No power supply to transmitter Make sure the docking station is
connected to the local mains power
supply through an adapter and follow
step 5 to 7.
Battery power running low Follow steps 5 to 7 to recharge the
system.
Audio source not connected Make sure the audio output of your
audio source is connected to the
3.5 mm STEREO INPUT JACK of
your transmitter. Follow step 9 to 12.
Audio source is off Turn on your audio source.
Volume level set too low Adjust the volume level of your
audio source or the headphone.
Hearing Safety: Continuous use at a
high volume may permanently damage
your hearing.
Audio output level low In case of audio sources with
adjustable output level, adjust the
output level to a higher and
non-distorted level.
IMPORTANT: In case of certain TVs,
the headphone jack output level can
only be adjusted after accessing the TV
on-screen menu.
Headphone not tuned to Push and hold the AUTO-TUNING
the transmitter BUTTON for about 1 sec, then the
headphone will automatically search
for the best possible reception.
Interference from other 1) Alter the transmitter’s frequency
radio sources channel. Select 1 of the 3 options for
best reception.We advise you to
select channel 1 as the first option.
Next adjust the headphone’s tuning
channel as described above.
2) Move transmitter or headphone
elsewhere
Receiver too far away from Move closer for reception
transmitter
Transmitter other than
Make use of the SBC HC8562
SBC HC8562 is used transmitter provided. Some
transmitters already built into other
equipment may not be compatible
with the SBC HC8565 headphone
because of the advanced
technologies used.
ENGLISH 9
HC8560.qxd 15-09-2004 10:01 Pagina 9