Philips Xalio 300 - Manual (Page 6)

4
Installing your Xalio 300
Plug the power supply
unit into the wall socket.
Plug the telephone line
cord into the wall socket.
Open the battery door
on the handset by sliding it
down.
3
Connect the battery
pack to the connector inside
the handset. Place the
battery with sticker face up
and wires along the left side
of the battery pack.
When replacing the battery,
only use NiMH. Optimal battery
life is reached after 3 cycles of full
charge / discharge.
Standby time : around 300 hours
Talk time : around 18 hours
4
Put the handset on the
base and charge for 24
hours before use.
Replace the battery door. 5
Xalio 300 UK master.qxd 25/03/03 13:08 Page 4