Cld-v2800 level iii • chapter three – Pioneer CLD-V2800 User Manual
Page 58
3.7.6 Register Control Commands
45)
REGISTER A SET
LD/CD
Function:
Changes the current setting of Register A. (Display)
Format:
Integer
R A
Explanation:
Register A sets detailed attributes of the display. The CLD-V2800
has three types of display settings: Frame number (LD-CAV) or
Time number (LD-CLV, CD); Chapter number (LD-CAV or CLV) or
Track-Index number (CD); and User’s Display for user-generated
messages, lines 0-9. Available combinations of the display settings
are shown in the following table. Initial value is 3.
All the character displays are turned ON/OFF by the display control command.
The display contents are determined by Register A.
* CD Track and Index numbers are processed in the Chapter Register. CD Block
numbers are processed as part of the time number in the Frame/Time Register.
The display positions on the screen for the CLD-V2800 are pictured below:
CLD-V2800 Level III • Chapter Three
CLD-V2800 Level III User’s Manual
TP 120 v. 1.0 • 10/95
3-39
Integer
Function
User’s
Chapter/ Frame/
Track
Time
0
Display Off
0
0
0
1
Frame or Time Number
0
0
1
2
Chapter or Track Number
0
1
0
3
Frame or Time and Chapter or Track
0
1
1
4
User’s Display
1
0
0
5
User’s Display and Frame or Time
1
0
1
6
User’s Display and Chapter or Track
1
1
0
7
User’s Display and Frame or Time,
and Chapter or Track
1
1
1
Figure 3-Q
Figure 3-R
Frame #(CAV) or Time # (CLV LaserDisc or CD)
Chapter #(CAV/CLV) or Track-Index # (CD)
CLD-V2800 User’s Display - Lines 0-9
10 lines, 20 characters per line
Register A
Display
Control
o o
o o
o o
o o