Philips CCD - Manual (Page 3)

Observation Camera
Introduction
Your new CCD camera is developed for use with a special observation
system monitor. It features a sensitive microphone thus registering both
images and sound via the monitor, as well as input contacts for
connecting external alarm devices.
Installation
Warning:
" Disconnect the monitor from the mains supply before
disconnecting a camera or accessory.
Only operating the stand-by key is not sufficient.
When the mains supply is connected, all camera lines are scanned. The
monitor uses this to register the camera configuration of the system and
to check whether any modifications have been made.
Sound
If required, the microphone incorporated in the camera, can be switched
off (fig. A-14).
If an intercom box is included in the camera line, the sound of camera
and intercom box will be reproduced by the monitor.
English
The illustrations to which this manual refers, are shown on the front and
back jacket flap.
English
2
g