Pioneer CDJ-800 - Manual (Page 7)

7
En
CONNECTIONS
÷ Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.
1. Connecting to a DJ mixer (DJM-300, DJM-500, DJM-600, DJM-3000)
(sound output and CONTROL terminal connection)
Use the supplied audio cables. Connect the white plug to the L (left) terminal and the red plug to the R (right) terminal.
Connect the supplied control cord to enable control of the unit from the mixer to allow fader start play and back cue.
Connecting DJM-600
Supplied audio cable
Supplied control cord
Supplied
audio
cable
Supplied
control
cord
÷ Connections for the DJM-300 and DJM-500 are similar; use the supplied audio cables to connect the mixer’s CD1 jacks to Player A, and CD2 jacks to Player B. When
using the DJM-3000, Player A is connected to LINE 1 of CH-1, and Player B is connected to LINE 3 of CH-2.
2. Connecting control cord to allow relay play
Alternate playback can be automatically performed when the CONTROL terminals of two units are connected with the supplied control cord.
☞ P. 15
Supplied control cord
BEFORE OPERATIONS