Install remote control battery, Connect additional equipment – Philips PET744 User Manual
Page 13
14
Install remote control battery
Caution
Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard
•
batteries in fi re.
Risk of decreased battery life! Never mix different brands or types of batteries.
•
Risk of product damage! When the remote control is not used for long periods,
•
remove the batteries.
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/
•
hazardouswaste/perchlorate.
For fi rst-time use:
1
Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert 1 CR2025 battery with correct polarity (+/-) as indicated.
3
Close the battery compartment.
Connect additional equipment
Connect a TV
You can connect the player to a TV to enjoy DVD.
Match the color of the AV cables (not supplied) with the jacks: the yellow
•
cable is for the yellow video jack, the red/white cable is for the red/white
audio jacks.
EN
PET744_98_EN.indd Sec3:14
PET744_98_EN.indd Sec3:14
4/2/2009 11:44:32 AM
4/2/2009 11:44:32 AM