Polk Audio CSW Series - Manual (Page 4)

DYNAMIC BALANCE ®
Advanced laser imaging technology allowed Polk Audio engineers to see the entire vibrating surface of a driver
and tweeter; they could actually see the resonance develop on the speaker cones—resonance that is the root
cause of loudspeaker distortion (A). Being able to see the resonance develop, they determined the “Dynamic
Balance” of high-tech materials, geometry and construction that effectively tune out the offending resonance (B).
Exclusive Dynamic Balance Composite Material Technology delivers sound |that’s effortlessly clean and clear,
even at lifelike volume. See more about Dynamic Balance at www.polkaudio.com/catalog/technology/.
B
A
polk
technolgy
4 CSW SERIES LOUDSPEAKERS
CSW200
For ultimate performance, there’s the CSW200, with a direct
radiating 10" driver in a 1.5 cubic foot slot load vented MDF
enclosure. The CSW200 produces robust bass down to the
lowest audible frequencies, thanks to its substantial size
and long-throw woofer. With its 12" x 12" grille, the CSW200
is for those who place a premium on performance over
size or unobtrusiveness.
Direct-radiating Laminar Flow Port enclosure is
designed for floor and ceiling installations.
Fits engineered floor joists and I-beam construction.
10" Long-throw driver with dual spiders for long
excursion control.
Klippel optimized driver.
Designed specifically for floor and ceiling installations.
Mounting hardware and isolation pads included.
12" X 12" grille (not included).
5 year warranty.
OVERALL DIMENSIONS:
34 1/8" L X 13" W X 9" D (86.68CM H X 33.02CM W X 22.86CM D)
OVERALL FREQUENCY RESPONSE: 22HZ-140HZ
SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.
CSW100
The CSW100 becomes practically invisible in a ceiling
or a floor. It can also tuck away in an entertainment
cabinet or other furniture. A single 10" woofer plus
patented Polk Audio technology—High Velocity
Compression Drive
® Bandpass Alignment—helps
produce a gutsy, driving bass that other similarly
sized built-ins can’t equal. Bass frequencies launch
out of the enclosure via an unobtrusive 3" x 12" vent.
The CSW100 comfortably fits in standard joist spacing.
10" Long-throw driver with dual spiders for long
excursion control.
Klippel optimized driver.
Patented High Velocity Compression Drive.
bandpass alignment with slot port venting.
Designed specifically for floor and ceiling installations.
Fits engineered floor joists and I-beam construction.
Mounting hardware and isolation pads included.
Sound launches from an unobtrusive 3" x 12" grille.
5 year warranty.
OVERALL DIMENSIONS:
26 1/4" L X 13" W X 9" D (66.68CM H X 33.02CM W X 22.86CM D)
OVERALL FREQUENCY RESPONSE: 27HZ-140HZ
SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.
CSW100 CSW200